Tools

Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 100

Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base...

Weld Mount Single Poly Clamp f/1/4" x 20 Studs - 3/4" OD - Requires 1.75" Stud - Qty. 25

Single ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 0.75" Stud Required:...

Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 30

White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge...

Weld Mount Polybonder Kit w/AT-880 Adhesive

Polybonder Kit with AT-880 AdhesiveKit Contains:AT-880 Polybonder Adhesive (1)Dispensing Gun (1)Mixing Tips (qty 10)AT-5W (qty 30)Plano Case Manufacturer : Weld Mount Manufacturer Part No : 88100

Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 50

Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge...

Weld Mount AT-7 Aluminum Base Swivel Tie Mount - Qty. 25

Aluminum Base Wire Tie MountThis tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for a...

Weld Mount AT-113 Large White Footman's Strap - Qty. 6

Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is incredibly strong, paintable, and is rated for over...

Sea-Dog Add-A-Snap - White - 2-1/2"

Add-A-Snap - White - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are...

Weld Mount Stainless Steel Stud 1.25" Base #10 x 24 Thread 2.5" Tall

Stainless Steel Stud 1.25" Base #10 x 24 Thread 2.5" TallStainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface...

Sea-Dog Add-A-Snap - Black - 1-1/2"

Add-A-Snap - Black - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING: This product can expose you to chemicals which...

Weld Mount 2.5" Tall Stainless Stud w/1/4" x 20 Threads - Qty.10

2.5" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels,...

Weld Mount AT-9 Aluminum Wire Tie Mount - Qty. 100

Aluminum Wire TieUsed with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or...